What do you do when a pallet is too heavy or too big to lift onto a turntable?
You bring the wrapper to the pallet instead. A mobile pallet wrapper is a battery powered machine on wheels that drives a full circle around a stationary load, applying stretch film as it goes. Because the pallet never moves, weight and size stop being limits. The load can sit where it was built, on the floor, in a racking aisle or on a loading dock.
That single change solves the problem most warehouses hit once their loads get past a certain size. Below is how mobile pallet wrapping actually works, the wrap method that holds a heavy load together, and how to pick between the two machines in the Omni range.
Why turntables struggle with heavy and oversized loads
A turntable wrapper spins the pallet and holds the film carriage still. That works well, up to a point. Three things break it.
The load has to be lifted on. Every pallet needs a forklift or pallet jack to get it onto the platform and off again. On a heavy load that is two extra handling movements, each one an opportunity for damage and a manual handling risk.
Spinning destabilises some loads. Tall, narrow, top heavy or loosely stacked pallets lean under rotation before the film has had a chance to contain them. The machine itself becomes the reason the load fails.
The footprint is fixed. A turntable is sized to a pallet footprint. Anything overhanging the pallet edge, anything longer than the platform, and anything on a skid or a crate rather than a standard pallet simply will not sit on it safely.
Mobile pallet wrapping removes all three at once. Nothing gets lifted, nothing spins, and there is no platform to outgrow.
What a mobile pallet wrapper is
A mobile pallet wrapper, also sold as a mobile pallet wrapping machine or a robot pallet wrapper, is a self propelled unit that follows the perimeter of a pallet under its own power. A film carriage on a vertical mast travels up and down as the machine circles, laying overlapping bands of stretch film from the base of the load to the top.
Robot pallet wrappers and robotic pallet wrappers are the same category of machine under different names, and Omni describes these as robotic pallet wrapping machines on its own product pages. Whatever the label, the defining feature is the same: the machine moves and the load does not.
Omni stocks two, and the mobile pallet wrapper range covers both, with rental available on a monthly fee that includes full maintenance and servicing.
How to wrap a heavy or oversized load, step by step
The method matters more than the machine. A mobile wrapper applied with the wrong pattern will still let a load shift in transit.
1.Stack and square the load before you wrap. Film contains a load, it does not correct one. Anything leaning, overhanging unevenly or stacked in an unstable pattern needs fixing first, because wrapping it only locks the fault in place.
2.Fit edge protection on sharp or strapped corners. Cardboard edge protectors spread the film tension across the corner instead of concentrating it on one point. On heavy loads with square corners this is the difference between film that holds and film that splits on the first bump out of the driveway.
3. Band the base to the pallet first. Run three to four full wraps around the bottom of the load and the pallet together before climbing. This is the single most skipped step and the most common reason a load arrives leaning. If the stack is not tied to the timber, the whole thing can slide as one piece.
4. Climb with consistent overlap. Each band should cover roughly half the one below it. Full overlap wastes film without adding containment. Too little leaves unsupported gaps where the load can bulge.
5. Lock the top. Two to three wraps at the top layer, then come back down. On an open topped or irregular load, a pallet top sheet applied before the final descent keeps dust and water out as well.
6. Cut and tuck the tail. A loose tail catches on racking, on other pallets and on forklift tynes, and once it pulls it unwinds the top bands first, which are the ones doing the most work.
7. Walk the finished pallet. Look for loose corners, visible gaps and any point where the film is stretched thin and shiny. Those are the places it will fail.
Getting the film settings right
Heavy loads need containment force, not more film. Three settings decide it.
Pre-stretch is how far the machine elongates the film before it reaches the load. A powered pre-stretch system takes a metre of film and delivers several metres of it, which both cuts film cost per pallet and increases holding force. On machines with powered pre-stretch, this is where most of the saving on a heavy load comes from.
Wrap force is the tension applied as the film lands. Set too low, a heavy load is wrapped but not held. Set too high, the film crushes product edges or snaps on corners.
Film gauge has to suit the load. A heavier pallet with sharp corners needs a thicker film than a light, smooth, square one, and pushing a thin film harder is not a substitute.
If film keeps breaking at the same point on every pallet, the cause is almost always a corner rather than the machine.
Choosing between the two machines
Both machines solve the same core problem. The difference is how much of the work is automated.
|
|
Cingo |
Viverra |
|
Item number |
85.614 |
85.613.01 |
|
Type |
Mobile, battery operated |
Mobile, battery operated |
|
Maximum wrapping height |
2,400mm |
2,400mm |
|
Power pre-stretch |
No |
Yes |
|
Automatic film cut off |
No |
Yes |
|
Remote control |
No |
Yes |
|
Rent from |
$360 per month plus GST |
$430 per month plus GST |
The Cingo mobile pallet wrapping machine is the straightforward option. It drives around the pallet, it is compact enough to work in tight areas, and its battery supports continuous use through a shift. For a site that wraps a handful of oversized pallets a day and currently does them by hand, this is the machine that removes the problem.
The Viverra mobile pallet wrapper adds the automation that matters at higher volume. Power pre-stretch drives film yield up and cost per pallet down, automatic cut off ends the manual cut and re-attach between pallets, and remote control means the operator is not walking the machine around every load. At volume, the film saving alone can carry the difference in cost.
As a rough guide, mobile wrappers suit operations running somewhere between ten and fifty pallets a day. Below that, the case is usually about load size rather than throughput. Above it, a fixed or inline machine is likely the better investment.
What a mobile pallet wrapper costs
Both robotic pallet wrapping machines are available to rent or to buy. Rental starts at $360 per month plus GST for the Cingo and $430 per month plus GST for the Viverra, with full maintenance and servicing included in the monthly fee. For most sites that compares favourably against the labour cost of hand wrapping the same loads, and it moves the machine off the capital budget.
For buyers comparing robot pallet wrapper prices across suppliers, the figure worth checking is not the machine price on its own. It is the total of the machine, the film it will consume over a year at its pre-stretch rate, and what servicing costs when something goes wrong. A cheaper machine with no powered pre-stretch can cost more over three years than a dearer one that halves film use.
Omni supplies both machines Australia wide, including Melbourne, with servicing and maintenance, warranty options and a 14 day onsite trial so the machine can be tested against real loads before anything is committed.
Frequently asked questions
What is a mobile pallet wrapper?
A mobile pallet wrapper is a battery powered machine that drives around a stationary pallet and applies stretch film as it circles. Unlike a turntable wrapper, the load never moves and never needs to be lifted onto a platform, so there is no limit on pallet weight imposed by the machine.
Can you wrap a pallet without a turntable?
Yes. A mobile pallet wrapper wraps the pallet where it stands. For heavy, tall or unstable loads it is often the better method, because the load is not lifted and not rotated, which removes the two points where those loads usually fail.
How tall a load can a mobile pallet wrapper handle?
Both the Cingo and the Viverra wrap to a maximum height of 2,400mm.
What is the difference between the Cingo and the Viverra?
The Cingo is the standard mobile machine. The Viverra adds power pre-stretch, automatic film cut off and remote control, which cut film cost and operator time per pallet and suit higher daily volumes.
Is a mobile pallet wrapper the same as a robot pallet wrapper?
Yes. Mobile pallet wrapper, robot pallet wrapper and robotic pallet wrapper all describe a self propelled machine that circles the load rather than turning it.
How much does a mobile pallet wrapper cost?
Rental starts at $360 per month plus GST for the Cingo and $430 per month plus GST for the Viverra. Purchase pricing is quoted per machine, and a 14 day onsite trial is available before purchase.
Does a mobile wrapper use more film than a turntable?
Not inherently. Film use is governed by pre-stretch, wrap force and overlap rather than by machine format. A mobile machine with power pre-stretch can use less film per pallet than a turntable without it.













































































































































































